Flanders Pattern Tracks for Human Tanks

Simple to use replacement treads for your tank conversion project. Can be ordered to fit most scifi plastic kits. These are intended to work with the current plastic kits - if you have one from the '90's, it may not fit! Parts are a one-for-one replacement for plastic treads.

15mm wide tracks include spacers used to widen the section of the hull where the tracks attach, as required. Some other accessories or parts may not be compatible (like track guards)

Each kit comes with parts to replace left and right tracks of one vehicle. Tracks are 3D printed in resin. Spacers, if required or printed in PLA. Color may vary from that shown in picture.

Ancient Battle Tank kit contains: 
8x spacers to extend the width of tracks (12.5mm and 15mm only)
10x single tracks (replaces part 'B7' from the plastic kit)
2x four-track sections (replaces part 'B8' from the plastic kit)
2x six-track sections (replaces part 'B6' from the plastic kit)
2x twelve-track sections (replaces part 'B5' from the plastic kit)
2x compressed eight-track sections (replaces part 'B9' from the plastic kit)
2x stretched eight-track sections (replaces part 'B10' from the plastic kit)

Battle Tank kit contains: 
8x spacers to extend the width of tracks (12.5mm and 15mm only) 
10x single tracks (replaces parts 'L6' and 'R6' from the plastic kit)
2x four-track sections (replaces parts 'L5' and 'R5' from the plastic kit)
2x six-track sections (replaces parts 'L4' and 'R4' from the plastic kit)
2x twelve-track sections (replaces parts 'L3' and 'R3' from the plastic kit)
2x compressed eight-track sections (replaces parts 'L1' and 'R1' from the plastic kit) 2x stretched eight-track sections (replaces parts 'L2' and 'R2' from the plastic kit)

Transport Kit contains: 
8x spacers to extend the width of tracks (12.5mm and 15mm only)
12x single tracks 4x two-track sections
4x four-track sections
4x twelve-track sections

Ancient Heavy Tank Kit contains: 
1x Front-left spacer (12.5 and 15mm only)
1x Front-right spacer (12.5 and 15mm only)
4x bottom spacers (12.5 and 15mm only)
2x twelve-track top sections (replaces part B13)*
2x twelve-track rear sections (replaces part B14)*
2x ten-track and nine-track sections (combine to replace B12)
2x eight-track sections (replace part B11)
2x three-track sections (replace part B15) 12x single tracks (replace part B10)
* These track sections work along with the spacers to join the two halves of each side where the tracks mount.

Lore: The agro-world of Flanders orbits the same binary star system as the Renault Factory world. During the Apostasy of Kipkean, Flanders became the site of extensive fighting, quickly devolving into brutal trench warfare. The fields of Flanders shortly became churned to a thick mud. The standard pattern of tracks fitting on Imperial Armor was found inadequate. On Renault, a wider pattern of track was created to better navigate the difficult conditions of Flanders. STCs for many Imperial vehicles were modified to incorporate the new Flanders-pattern tracks. To this day, the factory world of Renault still produces vehicles with wider tracks. These variations are prized for their improved mobility.

This is an original design by Tiny Panzer Studio